Rocklabs World Leaders In Sample Preparation Equipment







 

Boyd Crusher User Survey

Complete this on-line Survey and receive a FREE portable Infrared Heat Sensor (Heat Gun) to monitor the bearings of the Boyd Crusher.

Name:
Organisation:
Telephone:
Fax:
Email:
Delivery Address for your Heat Gun:
Which year did you purchase your Boyd Crusher?
Serial No(s):
*Note: (the serial number is located on the mainframe of the Boyd to the rear of the pressure rollers)
How many hours per day do you use your Boyd Crusher(s)?
What type of samples do you crush?
Have you had any mechanical problems with your crusher(s)? If so please list all problems.
Are you happy with the performance of the Boyd Crusher? Yes No
If you answered No to the above question please state reason why not.
Can you suggest any improvements we could make?
How often do you lubricate your Boyd Crusher? i.e. every 100 hours, six monthly or once a year.
Do you monitor the bearing temperature? Yes No


Use of Heat Gun:

The best way to monitor bearings is to use a “Heat Gun” to record bearing housing temperatures.  We suggest once a week.   If the running temperature (after 3 hours operation) increases by even a few degrees, the bearing needs more grease or is failing mechanically.

Add some grease and check the temperature again after an hour of running time.  If the temperature goes back to normal, add some more grease and increase your greasing schedule.

Full instructions and a CD of how to use the Heat Gun will be sent to you with the gun.

Thank you for participating in this Survey.

 

[ Home ] [ Key Personnel ] [ Product Guide ] [ Reference Material ]
[ Newsletter ] [ Agents Guide ] [ Contact Us ] [ Downloads ]

Copyright Rocklabs © 1999 - All Rights Reserved
All names are either trademarked or copyright and belong to their respective owners