|
Smart Geo-Prep...
Rocklabs’ Smart Geo-Prep is an automated
version of the very successful Boyd – RSD Combo. The automation
is provided by an easy to use PLC.
When using Smart Geo-Prep the
operator chooses an optimum weight for the split that will be
produced. For example, when using a ring or puck mill, there is
an optimum amount for pulverising, not too high a weight so
the sample is pulverised fully, not too small a weight so the
pulverised sample is representative of the original
material.
The operator weighs each sample (this can be recorded
in a LIM System) an loads it into the Boyd Crusher. The
sample material falls into a small belt conveyor that takes it
to the RSD.
The speed of the belt is controlled by a PLC so
that small samples travel slowly, to ensure a high quality split
through the RSD. The RSD is controlled by the PLC to provide
the pre-set weigh plus the remainder. The
remainder can be retained or dumped. If dumped, it can be removed
by a second belt conveyor to a bin or outside
the building.
For more details on Rocklabs equipment, please
feel free to contact the ROCKLABS team.
|
