BENCH TOP RING MILL

Rocklabs Whisper Series Bench Top Ring Mills have been developed for laboratories pulverising 1- 100gram samples. It is used for
pulverising rocks, soil, coal, cement, glass, limestone, bricks, wood, plant material, slags, concrete, etc… for XRF, XRD or other instrumental methods or wet chemistry.
The noise level is less than 80dB. It provides fast and dust free grinding, homogeneity grinding, very low contamination of samples,
easy to clean, low capital cost, long life and maintenance free. The Bench Top Ring Mill is ideal for laboratories as it is small and compact to fit on a work bench.

Dimensions:

Depth 420mm
Width 420mm
Height 510mm
Weight: 60kg

STANDARD RING MILL

Rocklabs Whisper Series Standard Ring Mills have been developed for pulverising
1-1000gram samples. It is used for pulverising rocks, soil, coal, cement, glass, limestone, bricks, wood, plant material, slags, concrete, etc… for subsequent analysis by instrumental methods or wet chemistry.
The noise level is less than 85dB. It provides fast and dust free grinding, homogeneity grinding, very low contamination of samples,
easy to clean, low capital cost, long life and maintenance free. Rocklabs offers two designs of clamp, manual rotoclamp or pneumatic clamp (compressed air required).

Dimensions:

Depth 600mm
Width 840mm
Height 1200mm
Weight: 200kg

CONTINUOUS FLOW RING MILLS

Rocklabs Continuous Flow Ring Mills have been developed for pulverising large samples, from 1kg – 1tonne. It is used for coarse pulverising of large samples for mineral separation (e.g. zircon dating), prepare samples for on-stream analysis, dry or slurries.

This machine provides continuous flow through operation, giving a high productivity. Samples are fed from hopper via a low maintenance variable speed vibrating feeder. For dust extraction, there is a built-in ducting of cyclone with external vent for connection to dust extraction system. The noise level is less than 85dB.

There are 3 options available at Rocklabs.

Option 1: Sample flows in a 10kg container
Option 2: Sample flows in a 500gram pottle/container
Option 3: Samples flows from the CRM into a Rotating Sample Divider (various segments are available)

Dimensions:

Depth 880mm
Width 760mm
Height 1500mm
Weight: 380-420kg