Introduction.
The AP200, AP means All Purpose, is a newly designed compact and
userfriendly automated System. It is designed to process up to 200
samples per day. This System has incorporated our latest technology
for splitting out an accurate sample. AP200 consists of a sample lifter,
a touch screen control console, a crushing-splitting (linear sample
divider) tower, sample and waste removal conveyors and a CRM-RSD
for pulverising-splitting.
The main features at a glance.
The AP200, AP means All Purpose, is a newly designed compact and
userfriendly automated System. It is designed to process up to 200
samples per day. This System has incorporated our latest technology
for splitting out an accurate sample. AP200 consists of a sample lifter,
a touch screen control console, a crushing-splitting (linear sample
divider) tower, sample and waste removal conveyors and a CRM-RSD
for pulverising-splitting.
The main features at a glance.
•
The control console has a touch screen control panel, a weighing
scale,five push buttons including an Emergency Stop button and the
power switches on the side.
scale,five push buttons including an Emergency Stop button and the
power switches on the side.
•
The Dump Master Lifter is a lifting device with safety features which
loads samples up into the hopper of the crushing-splitting tower.
loads samples up into the hopper of the crushing-splitting tower.
•
The Crushing-Splitting module consists of a Boyd Crusher and our
latest design of Linear Sample Divider.
latest design of Linear Sample Divider.
•
Two belt conveyors for transferring sample and waste respectively.
•
The CRM-RSD with a double tier Head provides a fine product and
an accurate split.
an accurate split.
•
Sensors are used in this System to maintain safety and to control
various moving components.
various moving components.
•
Sensors are also used to control the movement of the LSD, splitting
an accurate percentage according to the weight input from the scale
at the beginning of the process.
an accurate percentage according to the weight input from the scale
at the beginning of the process.
•
All processes are controlled by PLC.
•
Throughout the whole process, the dust in the System is minimised by
air suction. There are a total of seven air suction points located in the
system where fi ne dust is most likely to be produced.
air suction. There are a total of seven air suction points located in the
system where fi ne dust is most likely to be produced.
