Introduction.
System one is designed for blast hole and R.C. samples only and the
second System is designed for both Drill Core and Blast Hole samples.
These two Systems were built in combinations of different modules:
Crushing-Splitting modules, Conveyor modules, Pulverising-Splitting
modules, Sample collecting modules and a control console.
System for Blast Hole and R.C. samples
System for Drill Core, Underground,
Blast Hole and R.C. samples
System one is designed for blast hole and R.C. samples only and the
second System is designed for both Drill Core and Blast Hole samples.
These two Systems were built in combinations of different modules:
Crushing-Splitting modules, Conveyor modules, Pulverising-Splitting
modules, Sample collecting modules and a control console.
System for Blast Hole and R.C. samples
•
Has a control console with weighing scale, touch screen panel,
flashing buttons for clear indication of process and PLC.
flashing buttons for clear indication of process and PLC.
•
Sample is weighed and PLC calculates the percentage of split
required for each split.
required for each split.
•
Stainless bins used for loading sample and collecting waste
sample on roller conveyors.
sample on roller conveyors.
•
Crushing-Splitting module consists of a bin lifter, shaking screen
and our latest design of LSD (Linear Sample Divider).
and our latest design of LSD (Linear Sample Divider).
•
New designed shaker screen removes fines under 2mm, remixing
with the crushed coarse fraction before splitting.
with the crushed coarse fraction before splitting.
•
Pulverising-Splitting module consists of the latest double-tier head
for fine pulverizing and LSD for accurate splitting.
for fine pulverizing and LSD for accurate splitting.
•
Sensors are use throughout the System to control various moving
components and for safety purposes.
components and for safety purposes.
•
In the final sample collecting module, the final splits (duplicate split
and remainder) are collected in steel cups on an X-Y table.
and remainder) are collected in steel cups on an X-Y table.
•
Dust extraction ports are allocated in different areas of the System.
System for Drill Core, Underground,
Blast Hole and R.C. samples
•
Similar to the above System with an extra module that includes a
sample lifter and a Big Boyd primary crusher.
sample lifter and a Big Boyd primary crusher.
•
Large sample lumps are pre-crushed with Big Boyd primary crusher
before further crushing with the Boyd Crusher.
before further crushing with the Boyd Crusher.
•
The Big Boyd primary crusher has a new blockage sensor and
thermocouples to monitor the bearing temperatures.
thermocouples to monitor the bearing temperatures.
